# View source for Talk:Segmentation

 Credits - Segmentation Old wiki page: Segmentation Original author(s): Jokester

Hmm, there is a ton of segmentation information scattered throughout the wiki. I'm planning on redoing some of the information on this page if you guys think this will be useful. My thoughts are to divide it into

```   * Overview
* Segment Variables
* Selecting best segments
* Granularity vs Population
* Saving stats
```

If you feel this will be good I will go through with it, otherwise I can just post all my bookmarks on the subject here. Also, if you have any other good ideas for sections feel free to put them there. -- Jokester

Go ahead. Just pour all the current stuff over to a page like /Discussion and make a structured page about segmentation instead. That would be great. -- PEZ

I'm taking a look at possible segmentations for Watermelon and am considering lateral distance to wall as a segment for my Guess Factor gun. Does this seem like a reasonable segmentation factor? -- Synapse 04:44, 6 June 2009 (UTC)

Absolutely, many bots segment on wall distance. Some use the distance to a wall if orbiting in a circle. Others use the distance if continuing in a straight line. It's also common to segment on distance to wall if you reverse direction. In theory, this might catch when an opponent is pinned in the corner. Experiment with what works best for you and let us know. --Corbos 05:19, 6 June 2009 (UTC)

I've made an abstract Axis class to represent the idea of a segmentation axis, and I've implemented a few common axes, including lateral distance to the wall as mentioned above. I've made good progress towards realizing my goal of automatic segmentation, but another obstacle arises. How do I determine the fitness of a particular set of visit count stats? My mechanism will produce a large number of well-populated visit count stat arrays for a variety of segmentations. Am I just looking at number of hits received? Ratio of average to maximum? -- Synapse 09:06, 11 June 2009 (UTC)

I think the flatness (entropy?) of the set is most important. Don't really know, just THB0.02 =) » » 09:31, 11 June 2009 (UTC)

Using entropy like Nat says for the resulting guessfactors (NOT for the incoming axis values) would make a little sense, however it's suboptimal. "ratio of maximum to average" would be far more useful for Robocode, since you can only fire at the maximum point, not fire an energy distribution across the whole guessfactor range, like entropy would be assuming. For the mechanism you you have in place, "ratio of maximum to average" would definitely be best, WITH a special and important condition of "unacceptable if too few hits in this array", to deal with cases like only having two hits that happen to have a large difference. --Rednaxela 13:15, 11 June 2009 (UTC)

Maybe some huge Bin Smoothing will take care of when there is less hits? Using Gaussian smoother without any bandwidth will result in, I think, quite flat stats. If I remember correctly, it look like:

```+-------------+-----+-------+------+-------+-----+------+-----+------+-----+
| GuessFactor |  -1 | -0.75 | -0.5 | -0.25 |  0  | 0.25 | 0.5 | 0.75 |  1  |
+-------------+-----+-------+------+-------+-----+------+-----+------+-----+
| Visit Count | 0.3 |  0.35 |  0.4 |  0.45 | 0.5 | 0.45 | 0.4 | 0.35 | 0.3 |
+-------------+-----+-------+------+-------+-----+------+-----+------+-----+
```

Therefore if it has only 2 hits, the intersected part will be fired... » » 14:40, 11 June 2009 (UTC)

That's beside the point Nat. A segment with 2 data points will always be a crappy segment no matter how you spin it. --Rednaxela 23:51, 11 June 2009 (UTC)

I'm trying to figure out how to integrate segmentation into my WaveSurfing bot GravityWave. So far, all I have is a headache and some useless code. So I have a couple of questions:

• what would be the best bot to look at for wavesurfing segmentation?
• what segment axis' are good for wavesurfing?

There is more, but I can't think of any at the moment. Thank you --Jacob Litewski 16:21, 6 June 2009 (UTC)

I don't know if is the best, but I learned a lot from Dookious. --zyx 16:34, 6 June 2009 (UTC)
I would say, don't look at any specific bot, look at a variety, and not only that try to come up with your own ideas and just try them. AS far as what segment axis, it's similar to what you want for the gun, except a little less heavily segmented, since you get less data. --Rednaxela 16:36, 6 June 2009 (UTC)
So basically mess with it until you get a good combination. Alright. Now it's just the problem of implementing it... :P I'll start working on that in a while. --Jacob Litewski 20:55, 6 June 2009 (UTC)

For a start, lateral velocity. That's definitely the most important. After that, try advancing velocity, distance, and then some time-based segments, like time-since-reverse. But all of these are secondary to lateral velocity.

I added some functions to my Utilities class to make segmentation implementation easier. That includes Lateral and Advancing Velocity, Acceleration, Heading and Relative Heading Functions. It's just modifying GravityWave (which is currently a semi-modified BasicSurfer) to use them. --Jacob Litewski 23:42, 6 June 2009 (UTC)

I am having trouble with GrubbmGrb in the fast learning challenge (random movement only) . Do you have any idea what segments I should try? chart of scores here: User:AW/lupus . -- User:AW

## Contents

Ideal amount of segments303:22, 16 June 2019

## Ideal amount of segments

Hi, how much segmentation can you add to a gun before the benefit of the segmentation is lost due to the added noise created by the segment? I noticed many MiniBots only have 5-6 different segments in their guns. I don't know if this is because of the codesize requirements or because too many segments create too much noise in the enemy's movement profile. Thanks!

03:21, 15 June 2019

You do not have permission to edit this page, for the following reasons:

• The action you have requested is limited to users in the group: Users.